diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index e732ac1..cd9ba6b 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -88,6 +88,11 @@
 	select OF_BOARD_SETUP
 	default y
 
+config ARCH_UNIPHIER_PXS3
+	bool "Enable UniPhier PXs3 SoC support"
+	depends on ARCH_UNIPHIER_V8_MULTI
+	default y
+
 config CACHE_UNIPHIER
 	bool "Enable the UniPhier L2 cache controller"
 	depends on ARCH_UNIPHIER_32BIT
diff --git a/arch/arm/mach-uniphier/board_init.c b/arch/arm/mach-uniphier/board_init.c
index ac7e3a6..e89a4c5 100644
--- a/arch/arm/mach-uniphier/board_init.c
+++ b/arch/arm/mach-uniphier/board_init.c
@@ -168,6 +168,14 @@
 		.misc_init = uniphier_ld20_misc_init,
 	},
 #endif
+#if defined(CONFIG_ARCH_UNIPHIER_PXS3)
+	{
+		.soc_id = UNIPHIER_PXS3_ID,
+		.nand_2cs = false,
+		.sbc_init = uniphier_pxs2_sbc_init,
+		.pll_init = uniphier_pxs3_pll_init,
+	},
+#endif
 };
 UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_initdata, uniphier_initdata)
 
diff --git a/arch/arm/mach-uniphier/clk/Makefile b/arch/arm/mach-uniphier/clk/Makefile
index 37df04b..43df670 100644
--- a/arch/arm/mach-uniphier/clk/Makefile
+++ b/arch/arm/mach-uniphier/clk/Makefile
@@ -25,6 +25,7 @@
 obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= clk-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= clk-ld11.o pll-ld11.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= pll-ld20.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= pll-pxs3.o
 
 endif
 
diff --git a/arch/arm/mach-uniphier/clk/pll-pxs3.c b/arch/arm/mach-uniphier/clk/pll-pxs3.c
new file mode 100644
index 0000000..e29d9d0
--- /dev/null
+++ b/arch/arm/mach-uniphier/clk/pll-pxs3.c
@@ -0,0 +1,7 @@
+/*
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+void uniphier_pxs3_pll_init(void)
+{
+}
diff --git a/arch/arm/mach-uniphier/cpu-info.c b/arch/arm/mach-uniphier/cpu-info.c
index a9c8167..94dce7c 100644
--- a/arch/arm/mach-uniphier/cpu-info.c
+++ b/arch/arm/mach-uniphier/cpu-info.c
@@ -52,6 +52,9 @@
 	case UNIPHIER_LD20_ID:
 		puts("LD20 (SC1401AJ1)");
 		break;
+	case UNIPHIER_PXS3_ID:
+		puts("PXs3");
+		break;
 	default:
 		printf("Unknown Processor ID (0x%x)\n", id);
 		return -ENOTSUPP;
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index d207806..3aeb5b1 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -112,6 +112,7 @@
 void uniphier_pro4_pll_init(void);
 void uniphier_ld11_pll_init(void);
 void uniphier_ld20_pll_init(void);
+void uniphier_pxs3_pll_init(void);
 
 void uniphier_ld4_clk_init(void);
 void uniphier_pro4_clk_init(void);
diff --git a/arch/arm/mach-uniphier/sbc/Makefile b/arch/arm/mach-uniphier/sbc/Makefile
index b85b1fe..fe9d85a 100644
--- a/arch/arm/mach-uniphier/sbc/Makefile
+++ b/arch/arm/mach-uniphier/sbc/Makefile
@@ -10,3 +10,4 @@
 obj-$(CONFIG_ARCH_UNIPHIER_LD6B)	+= sbc-pxs2.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD11)	+= sbc-ld11.o
 obj-$(CONFIG_ARCH_UNIPHIER_LD20)	+= sbc-ld11.o
+obj-$(CONFIG_ARCH_UNIPHIER_PXS3)	+= sbc-pxs2.o
diff --git a/arch/arm/mach-uniphier/soc-info.h b/arch/arm/mach-uniphier/soc-info.h
index d7619f4..0473252 100644
--- a/arch/arm/mach-uniphier/soc-info.h
+++ b/arch/arm/mach-uniphier/soc-info.h
@@ -20,6 +20,7 @@
 #define UNIPHIER_LD6B_ID	0x2f
 #define UNIPHIER_LD11_ID	0x31
 #define UNIPHIER_LD20_ID	0x32
+#define UNIPHIER_PXS3_ID	0x35
 
 unsigned int uniphier_get_soc_id(void);
 unsigned int uniphier_get_soc_model(void);
diff --git a/doc/README.uniphier b/doc/README.uniphier
index a42eaa9..539b1f2 100644
--- a/doc/README.uniphier
+++ b/doc/README.uniphier
@@ -62,6 +62,10 @@
     $ make uniphier_ld20_defconfig
     $ make CROSS_COMPILE=aarch64-linux-gnu-
 
+PXs3 reference board:
+    $ make uniphier_v8_defconfig
+    $ make CROSS_COMPILE=aarch64-linux-gnu- DEVICE_TREE=uniphier-pxs3-ref
+
 You may wish to change the "CROSS_COMPILE=..." to use your favorite compiler.